Homes
Kitchen & bath cabinets
Reface dated cabinets in wood grain or a solid modern color, without replacing boxes or doors.
Quick answer
3M™ DI-NOC™ Architectural Finishes are self-adhesive interior films that look and feel like wood, stone, concrete, metal, leather and solid colors. They are applied over existing walls, doors, columns, cabinets, elevators and fixtures, including curved surfaces, so a space can be refreshed without demolition. 3M offers nearly 1,000 designs. Texas Tinted installs DI-NOC for Houston homes and businesses.
A new surface without tearing anything out
Replacing cabinets, wall panels or elevator interiors means demolition, dust, dumpsters and weeks of downtime. DI-NOC goes on over the surface you already have. 3M’s Comply™ adhesive lets air escape during application, which helps the film go on smooth.
The film can wrap edges and curves, so finished pieces look like solid material instead of a sticker.
DI-NOC projects in Houston
Buildings
Elevator interiors
Update cab walls and doors in a day or two, with far less downtime than new panels.
Offices
Reception desks
Give a front desk a wood, stone or metal finish that matches a new brand.
Offices
Doors & frames
Refresh scuffed interior doors and frames across a whole office floor.
Retail
Retail fixtures
Change the look of fixtures and columns between seasons or brand refreshes.
Multi-family
Apartment turns
Refresh cabinets and accent walls between tenants without a renovation crew.
How a DI-NOC job works
- Step 1
Choose a finish
We help you pick from 3M’s catalog and bring samples to see under your lighting.
- Step 2
Prep the surface
Surfaces are cleaned, repaired and primed as needed so the film bonds properly.
- Step 3
Install
Film is applied, wrapped around edges and curves, and trimmed clean.
- Step 4
Use it
The surface is usable right away with normal gentle cleaning.
DI-NOC vs. replacing
| DI-NOC | Replace | |
|---|---|---|
| Demolition | None | Yes |
| Downtime | Days | Weeks |
| Waste | Minimal | Old material to haul |
| Finish options | Nearly 1,000 | Depends on material |
Where DI-NOC fits in a Houston remodel
Most of the DI-NOC work we do falls into two groups. The first is commercial spaces that cannot close: hotel corridors, medical offices, bank branches and elevator cabs, where a traditional refinish means scaffolding, dust and weeks of disruption. The second is homeowners who like their kitchen layout but not the oak cabinets, and who want a new finish without a six-week renovation.
In both cases the math is the same. The film costs less than new material, the labor is measured in days, and the old surface stays in place, so there is nothing to haul away. For leased or managed properties, that also means the space can go back to its original finish later.
Finishes we install most
- Fine wood and dry wood: oak, walnut, ash and weathered grains with a tactile texture, popular for cabinets and feature walls
- Metallic: brushed aluminum, stainless, bronze and oxidized metal for elevators, reception desks and columns
- Stone, concrete and mortar: marble, slate and poured-concrete looks for lobbies and bathrooms
- Single color and matte: solid tones for doors, frames and modern cabinet refacing
- Abrasion-resistant: a harder top layer for high-traffic surfaces like door faces and counters that see light use
Good surfaces for DI-NOC
DI-NOC bonds best to smooth, sealed, non-porous surfaces: laminate, painted drywall, primed MDF, metal, glass and existing veneer. Rough or chalky surfaces need priming first, and heavily damaged substrates need repair, because the film follows whatever is under it. We check every surface during the quote and include any prep in the proposal, so there are no surprises on install day.
Ask about pairing DI-NOC with frosted glass film for a full office refresh, or with solar film on the windows in the same visit.
Frequently asked questions
Can 3M DI-NOC go on kitchen cabinets?
Yes. Cabinet refacing is one of the most popular uses. Doors, drawer fronts and exposed cabinet sides can all be covered.
Can DI-NOC be used on countertops?
We recommend it mainly for vertical and light-use surfaces. Heavy-wear horizontal surfaces like busy countertops need a more durable solution.
How long does DI-NOC last?
3M lists an expected performance life of 12 years for indoor vertical applications.
Can DI-NOC be removed?
Yes, it can be removed professionally. Some substrates may need touch-up afterward.
Is DI-NOC the same as vinyl wrap?
It is a premium architectural film made for interior surfaces, with realistic textures and an air-release adhesive, rather than a vehicle wrap film.
Ready for cooler glass?
Get an instant price online any time, or call or text us. Shop hours: Mon–Sat 9 AM–8 PM, Sun 9 AM–7 PM at 2401 Fountain View Dr, Floor 1, Houston, TX 77057.